Brominated dioxins and furans in a cement kiln co-processing municipal solid waste

A field study and theoretical calculations were performed to clarify the levels, profiles, and distributions of polybrominated dibenzo-p-dioxins and dibenzofurans(PBDD/Fs) in a cement kiln co-processing solid waste, with a focus on the PBDF formation mechanism.The raw materials contributed greatly to input of PBDD/Fs into the cement kiln. The PBDD/F concentrations in the raw materials were much higher than those in particle samples from different process stages in the cement kiln. The PBDD/F concentrations in the clinkers were1.40% of the concentrations in the raw materials, which indicated that the high destruction efficiencies for PBDD/Fs by cement kiln. PBDD/F distribution patterns in particle samples collected from different process stages indicated the cement kiln backend was a major site for PBDD/F formation. PBDFs with high levels of halogenation, such as heptabrominated furans(Hp BDF), were the dominant contributors to the total PBDD/F concentrations and accounted for 42%–73% of the total PBDD/F concentrations in the particle samples. Our results showed that co-processing of municipal solid waste in a cement kiln may influence the congener profile of PBDD/Fs, especially for the higher halogenated PBDD fraction. In addition, there were significant correlations between the decabromodiphenyl ether and heptabrominated furan concentrations, which is an indicator of transformation from polybrominated diphenyl ethers to PBDD/Fs. Theoretical calculations were performed and demonstrated that elimination of HBr and Br_2 from polybrominated diphenyl ethers were the dominant formation pathways for PBDD/Fs. These pathways differed from that for polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs).     

壳聚糖/聚乙二醇/丙烯酸吸附剂对Cu2+、Co2+和Ni2+的吸附选择性和重复利用性

采用扫描电镜(SEM)和红外光谱(FT-IR)对辉光放电电解等离子体(GDEP)技术引发制备的壳聚糖/聚乙二醇/丙烯酸(CS/PEG/AA)聚合物吸附剂的形貌和结构进行了表征.研究了该吸附剂对Cu~(2+)、Co~(2+)和Ni~(2+)的吸附选择性、重复利用性和解吸动力学行为,同时结合X射线光电子能谱(XPS)探讨了可能的吸附机理.结果表明,CS、PEG和AA发生接枝共聚形成聚合物,其表面呈现疏松、多孔的三维网络结构;吸附最佳pH为4.8;在含有Cu~(2+)、Co~(2+)和Ni~(2+)的混合溶液中,CS/PEG/AA对Cu~(2+)有较好的吸附选择性;在EDTA-4Na洗脱液中CS/PEG/AA具有优异的再生和重复利用性,解吸动力学符合解吸准二级模型;Cu~(2+)在CS/PEG/AA上的吸附是由离子交换、配位螯合等共同作用的复杂的物理化学过程.     

酵母菌对低浓度铀的吸附机理及动力学研究

探究了以活性和高温灭活酵母为生物吸附剂对低浓度放射性核素铀的吸附能力、相关的动力学特性及机理.结果显示,活性酵母菌和灭活酵母菌对铀的最佳吸附p H分别为5.5和4.5,达到吸附动态平衡所需时间分别为240 min和30 min,活性酵母菌对铀的最佳吸附温度为26℃,而灭活酵母菌对铀的吸附能力受温度影响不明显.不同温度下,活性与灭活酵母对铀的吸附动力学均能较好地符合准二级动力学模型,可决系数均在0.99以上,表明活性与灭活酵母菌对铀的吸附过程中,都存在着电子共用或电子转移过程.扫描电镜结果显示,吸附铀后的活性酵母菌菌体表面出现凹陷,少量块状铀沉淀附着在表面,而经过高温高压处理的灭活酵母菌菌体表面积明显增大,大量的纳米颗粒状铀沉淀附着在表面.红外光谱分析表明,在活性酵母菌对铀离子吸附的过程中,羟基、醛羰基、N—H、C—N等为主要的吸附位点,而羟基、酮羰基、P=O、—HPO_4~(2-)等为灭活酵母菌对铀离子吸附的主要位点.     

高效磷吸附剂Mg/Al-LDO的制备及除磷机制

针对污水中磷的去除问题,采用优化后的恒定pH值共沉淀法制备了Mg/Al-layered double hydroxides(Mg/Al-LDHs),经高温焙烧得到高效磷吸附剂Mg/Al-layered double oxide(Mg/Al-LDO);在对其吸附特性研究的基础上,并结合Zeta电位、XRD、FTIR分析吸附前后材料等电点、晶体结构及层间阴离子的变化,探讨Mg/Al-LDO吸附除磷机制.结果表明,采用优化后的共沉淀法,在Mg/Al比为2∶1,焙烧温度450℃,焙烧时间2 h条件下制备出的Mg/Al-LDO对磷酸根吸附性最好,最大吸附容量可达到176.94 mg·g-1,与理论吸附容量191.57 mg·g-1基本一致,远高出Mg/Al-LDHs及其它磷吸附剂.实验数据对准二级反应动力学模型的拟合结果较好,吸附过程符合Langmuir吸附等温模型.结合Zeta电位、XRD、FTIR的结果推测,Mg/AlLDO吸附除磷主要是通过静电引力、阴离子插层、离子交换、表面配位这4种作用协同完成.     

沼泽红假单胞菌PSB06对辣椒根际微生物群落结构的影响

生物农药的使用极大地减少了对环境的污染,探究生物农药对致病菌的细菌多样性及群落分布将为后续研究生物农药对致病菌的微生态调控提供理论依据.本研究运用Illumina Mi Seq高通量测序技术分析比较辣椒健康植株与疫病发病植株根际土壤微生物多样性,以及研究沼泽红假单胞菌PSB06对植株根际土壤的微生物多样性影响,探究沼泽红假单胞菌PSB06对辣椒疫病的微生态调控机制.结果显示,在第7 d和第14 d的来自同一处理的根际土壤细菌群落多样性变化没有显著差异,辣椒疫病发病植株根际土壤微生物多样性均小于健康植株根际土壤微生物多样性且喷洒沼泽红假单胞菌PSB06发酵液的土样微生物多样性最高;辣椒疫病发病植株根际土壤中放线菌丰度均小于健康植株且喷洒沼泽红假单胞菌菌剂PSB06的土壤中放线菌的丰度最高.辣椒发病植株与健康植株根际土壤中微生物多样性存在显著差异.施用沼泽红假单胞菌可以改善土壤微生物区系,提高土壤微生物群落丰富性以及土壤中放线菌所占的丰度.     

Enhanced ozonation degradation of atrazine in the presence of nano-ZnO: Performance, kinetics and effects

Enhanced ozonation degradation of atrazine (ATZ) with nano-ZnO (nZnO) as catalyst and the influences of the operational parameters have been investigated through semi-continuous experiments in this study. The results demonstrated that the combination of ozone (O₃) and nZnO showed an obvious synergetic effect and the ATZ degradation conformed to pseudo-first-order kinetics. An improvement of ATZ degradation efficiency by 41.8% and pseudo-first-order rate constant by more than a factor of four was obtained in the O₃/nZnO process after 5 min of reaction compared to O₃ alone. Meanwhile, the degradation efficiency of ATZ was gradually enhanced with increasing nZnO dosage and initial pH in the range from 3.0 to 8.0, and a higher amount of ATZ was degraded when the initial concentration of ATZ rose from 0.5 to 5 mg/L. Additionally, sulfate ion, chloride ion, nitrate ion and low concentrations of humic acid substances led to enhancement of the ATZ degradation. The notable decrease of ATZ removal efficiency observed in the presence of radical scavengers and the results of free radical tests indicated that OH is the dominant active radical species. The mechanism investigation demonstrated that the enhancement effect could be attributed to the introduction of nZnO, which could promote the utilization of O₃, enhance the formation of superoxide radical, and further accelerate the production of hydrogen peroxide and the generation of OH/O₂-.     

紫外/超声协同灭活隐孢子虫的影响因素及机制

为研究UV/US（Ultraviolet/Ultrasonic,紫外/超声）协同对水中隐孢子虫的灭活机制,采用UV灯（功率为14 W）与US发生器（频率为20 kHz,功率为150 W）组合装置协同灭活隐孢子虫,考察pH、温度、浊度和HA（腐殖酸）对UV/US协同灭活隐孢子虫的影响,并通过SEM（扫描电镜）、蛋白质试验和琼脂糖凝胶电泳检测对灭活机制进行了探讨.结果表明:pH对UV/US杀灭隐孢子虫的影响不大,碱性条件下灭活率略高于中性和酸性条件;温度对灭活率有一定影响,5℃下灭活率较低,随温度的上升,灭活率逐渐提高,25℃下10 min灭活率可达99%以上;悬浮物抑制隐孢子虫的灭活,浊度为40 NTU时,UV/US作用25 min的灭活率仅为93.88%;HA对灭活的影响表现为低浓度促进,高浓度抑制;ρ（HA）高于10 mg/L时,继续增大ρ（HA）对隐孢子虫灭活率影响不大.研究显示:UV/US协同作用对隐孢子虫的灭活机制主要是使其卵囊破裂,同时损伤了隐孢子虫胞内的DNA.      

柴油加氢装置关键换热器管束腐蚀机理研究

目的明确兰州石化柴油加氢装置某换热器管束(主要材质为15Cr Mo钢和321不锈钢)的腐蚀失效原因。方法采用高温高压釜试验和模拟铵盐结晶试验研究15Cr Mo钢和321不锈钢在服役介质中的腐蚀机理。结果 15Cr Mo钢的腐蚀失效形式表现为铵盐结晶下的快速均匀腐蚀和其他部位的点蚀;而321不锈钢的腐蚀失效形式则相反,主要表现为铵盐结晶下的点蚀。结论为避免铵盐结晶引起的腐蚀穿孔,建议提高换热器出口温度到230℃以上,将换热器出口的注水工艺改为注中和缓蚀剂,在加氢反应器出口增设脱氯罐。     

半导体光催化技术净化氮氧化物研究进展

氮氧化物(NO_x)是形成臭氧和二次气溶胶的重要前体物之一,开发高效的NO_x控制技术对我国大气污染防治具有重要意义。光催化技术作为一种新型的高级氧化技术,对环境浓度水平的空气污染物具有良好的去除效果,是当前研究的热点。本文总结了近年来光催化材料对污染物NO_x催化降解的研究进展,包括:(1)讨论了NO_x光催化氧化去除机理;(2)详细综述了提高光催化材料性能的三大主要措施:增强催化剂的光吸收效率,提升载流子分离和迁移效率以及构筑表面活性位;(3)阐述了半导体光催化技术在净化空气方面的应用,并指出光催化技术在去除NO_x方面的发展前景。     

胞外聚合物对活性污泥吸附去除全氟辛烷磺酸（PFOS）的影响

采用活性污泥和去除胞外聚合物(EPS)污泥作为吸附剂,探讨污泥吸附PFOS的机制和EPS在吸附过程中的作用.结果表明,活性污泥和去除EPS污泥吸附PFOS均符合准二级动力学方程,平衡吸附量(q_e)分别为0.46 mg·g~(-1)和0.38 mg·g~(-1),化学吸附占主要作用.吸附等温线可以用Freundlich、Langmuir及Temkin方程拟合.Ca~(2+)和Cu~(2+)通过离子架桥作用促进PFOS在污泥上的吸附.活性污泥吸附去除PFOS的效果明显优于去除EPS后的污泥.傅里叶红外光谱(FTIR)和X射线光电发射光谱(XPS)分析吸附前后的污泥官能团变化,发现去除了EPS的污泥中羟基、羧基和氨基活性基团减少,而这些基团是PFOS吸附过程中参与反应的主要成分.由此可见污泥EPS中蛋白质含有的羧基和氨基活性基团为PFOS提供了吸附反应位点,EPS在吸附过程中起到至关重要的作用.